Scotty Cameron Phantom Iii 11r Oc Putter

Scotty Cameron Phantom 11R OC Spec III Limited Putter The Scotty Cameron Phantom 11R OC Spec III Limited Putter pairs the commanding stability of a full-sized mallet with a near-zero torque Onset-Center shaft arrangement. Its heavier head, broad modern footprint and centre-aligned construction are designed to resist unwanted rotation and promote dependable face control. Presented in a limited blacked-out specification, the Phantom 11R OC Spec III creates a focused view behind the golf ball. Three contrasting alignment lines clearly define the intended direction, while the solid 303 stainless steel face uses Chain-Link milling to balance softened acoustics with precise impact feedback. LIMITED OC SPEC III CONSTRUCTION The Phantom 11R OC Spec III has been created for golfers seeking maximum mallet stability in an exclusive Scotty Cameron design. Its carefully coordinated black head, shaft and grip produce a distinctive appearance from every angle. Milled and hand-finished in California, this limited-release model combines premium craftsmanship with specialised low-torque engineering. ULTRA-STABLE MODERN MALLET A large, confidence-inspiring chassis gives the Phantom 11R a substantial presence at address. Its broad shape distributes mass around the outer sections of the head, helping increase stability and minimise the effects of unwanted movement. This high-MOI-inspired profile is particularly well suited to golfers who favour the reassurance, alignment assistance and controlled feel of a full-sized mallet putter. HEAVIER HEAD PERFORMANCE Additional head weight enhances the stable character of the Phantom 11R OC Spec III. The increased mass helps the putter retain momentum through the stroke and creates a measured, controlled sensation through impact. When combined with the broad mallet construction, this heavier specification provides the greatest level of stability within the limited OC Spec III range. ONSET-CENTER SHAFT POSITION Scotty Cameron's Onset-Center configuration positions the straight shaft in line with the putter's centre of gravity rather than towards the heel. Aligning these points helps the head resist twisting as it moves, creating a stable relationship between the face and intended path. The centred setup also provides a symmetrical view when addressing the ball. NEAR-ZERO TORQUE CONTROL The carefully balanced head and central shaft position produce near-zero torque, reducing the putter's tendency to rotate open or closed during the stroke. This characteristic supports a simplified, square-to-the-path motion and may appeal to players who prefer the putter face to remain naturally stable without significant manipulation from the hands. ONE-DEGREE FORWARD LEAN The Black KBS steel shaft is installed with 1 degree of forward lean. This subtle angle establishes a familiar hand position while preserving the benefits of the Onset-Center design. A 3.5-degree loft and 70-degree lie angle complete the carefully developed setup specifications. TOUR-INFLUENCED ALIGNMENT SYSTEM Three high-contrast sightlines stretch across the upper surface of the mallet. Developed with input from Tour players, the central line identifies the target direction while the neighbouring lines help frame the golf ball. The strong contrast against the black head makes the alignment system easy to identify, helping golfers establish a square setup and direct greater attention towards pace. PREMIUM BLACK PVD FINISH A Physical Vapour Deposition process bonds the rich black finish directly to the milled head. This durable coating produces the model's distinctive limited-edition appearance while reducing reflections in bright playing conditions. The same dark treatment continues onto the shaft, allowing the entire putter to appear visually connected from the grip to the sole. MILLED 303 STAINLESS STEEL FACE The Phantom 11R OC Spec III incorporates a solid 303 stainless steel face engineered to provide a responsive sensation at impact. Its precision-milled construction communicates useful strike feedback while complementing the reassuring weight and stability of the larger mallet head. CHAIN-LINK MILLING PATTERN Scotty Cameron's Chain-Link milling texture carefully controls the number of points at which the face contacts the golf ball. Reducing these touchpoints helps soften the impact sound without removing the tactile feedback golfers need to evaluate strike quality and distance control. BLACK KBS STEEL SHAFT A custom Black PVD KBS steel shaft supports the putter's low-torque configuration while contributing to its uninterrupted all-black appearance. The dark shaft blends into the head at address, reducing visual distraction and allowing the bright alignment lines to remain the primary focus. MATADOR MIDSIZE GRIP The custom 11-inch Black Matador Midsize grip offers a comfortable profile intended to limit excessive hand and wrist movement. Its shape encourages a quieter connection with the putter while retaining sufficient feedback, completing the coordinated black-on-black design. RIGHT AND LEFT-HANDED AVAILABILITY Unlike the Phantom 5 OC Spec III, the Phantom 11R model is produced in both right and left-handed configurations. Golfers can also choose from 33, 34 and 35-inch lengths to suit their preferred posture and setup. Specifications SpecificationDetails Model Scotty Cameron Phantom 11R OC Spec III Limited Putter Head Style Full-sized modern mallet with a heavier, stability-focused head Finish Durable, glare-reducing Black PVD Face Material Precision-milled 303 stainless steel Face Milling Chain-Link pattern for softened sound and preserved feedback Shaft Configuration Onset-Center straight shaft positioned in line with the centre of gravity Toe Flow / Torque Near zero Shaft Black KBS steel Forward Lean 1 degree Alignment Three high-contrast sightlines Loft 3.5° Lie Angle 70° Grip Custom 11-inch Black Matador Midsize Hand Options Right Hand Available Lengths 34'' Production Milled and hand-finished in California Availability Limited release