Iomic ABSOLUTE X JUMBO GOLF PUTTER GRIPS - JUMBO

Introducing the Iomic Absolute X Jumbo Putter Grip meticulously designed at a weight of 127 grams, standing out as IOMIC’s inaugural true Jumbo putter grip. These grips are crafted to provide golfers with an unparalleled experience on the course. The Iomic Putter Grip features a more rounded profile to enable the grip to fit into the palms correctly, reducing grip pressure. Available in three timeless colours—red, black, and blue—these grips not only add a touch of style to your putter but also deliver superior performance. The unique micro-tread pattern ensures an exceptional grip, allowing you to feel more in control during each stroke. The Low torque in Iomic grips can reduce the shot dispersion on off-centre hits by up to 30%, meaning you are more likely to hole putts even when you are not playing at your best. The most consistent grip in golf Iomic grips have extremely tight tolerance of weight due to the vacuum moulding production process and use of Iomics elastomer compound. This means that unlike rubber grips, Iomic grips do not soak up water in wet weather. Iomic Grips are UV Resistant and dont become hard, shiny and brittle over time, reducing the grip and feel. Iomic Absolute X Jumbo Putter Grip -

Features: Iomic elastomer compound Vacuum moulding production Reduce dispersion by up to 30% UV Resistant Waterproof design First true Jumbo putter grip from IOMIC Colours Available: Red, Black, Blue Micro-tread Pattern Offers excellent feel Weight: 127g - Core Size: 0.580 Round Authorised Iomic Retailer STEP-BY-STEP REGRIPPING INSTRUCTIONS The following supplies are needed: 1.PRO-GRIP DOUBLE SIDED GRIP TAPE 2.STANLEY KNIFE / BLADE 3.NEW GOLF GRIP 4.SOLVENT WHITE SPIRITS 5.RUBBER GLOVES TO PROTECT HANDS 6. TOWEL / CLOTH STEP 1 - Remove the old grip with a Stanley blade Be sure to cut away from yourself at all times. Peel or scrape off the old grip and grip tape. Using a cloth and Mineral Spirits Grip Solvent, clean off the residue. *If removing a grip from a graphite shaft be careful to avoid damage to the shaft STEP 2 - Wrap your PRO-GRIP double sided grip tape in a spiral formation from the top of the shaft to the point where the bottom of the grip will be on the shaft. Remove the tape backing and cover the end of the shaft with extra tape. STEP 3 - Cover the vent hole in the butt end with your finger or golf tee, and pour a generous portion of Solvent such as white spirits inside the new grip. Close the open end of the grip with your hand and shake to cover the entire inside of the grip. STEP 4 - Pour the excess Mineral Spirits Grip Solvent (through the vent hole) over the entire length of the two-sided tape. Apply generously. Use a tray to catch excess Mineral Spirits Grip Solvent for use on other clubs. STEP 5 - Place the grip over the shaft butt and Push the grip entirely onto the club. Be sure to push it all the way down and align the grip as desired. This must be done while the grip tape is still wet. STEP 6 - Allow grips to dry for several hours before playing.